|
1. Planer
cutting width must be 12"
__,
16"
__,
18"
__,
24"
__,
30"
__,
32" __ ,
40" __
|
|
2. Planer
must have the open drum and one-piece
design.
|
|
3. Planer
must have greasable shaft bearings on both
sides of the drum.
|
|
4. Planer
must be of Center Pivot design.
(see
picture)
|
|
5. Planer
must be of the Front Down
design.
|
|
6. Planer
must be equipped with controls to operate
the side shift, tilt, and depth
control.
|
|
7. Planer
must have 24" side shift
capability.
|
|
8. Planer
must have +/- 15 degrees of tilt
capability for 12"__, 16"__, 18"__,
24"__
|
|
9. Planer
must have +/- 7.5° of tilt capability
for 30"__, 32" __ , 40"__
|
|
10. Planer
must have 0-6" cutting depth.
|
|
11. Planer
must have a direct drive to the drum.
|
|
12. Planer
must be able to operate in Asphalt &
Concrete and equipped w/Low Torque
Asphalt, Combination, or Concrete
Pics.
|
|
13. Planer
must have an access door located on top to
service the drum.
|
|
14. Planer
must be equipped w/hydraulic motor that
matches the host machine for Correct Speed
and Torque of the drum.
|
